Roofing Spray Adhesive
Contact spray adhesive is a great application tool for the roofing industry as it delivers a high coverage of glue to speed up the installation process of your roofing materials. Our Roof Tack spray adhesive is designed for bonding roofing membranes such as EDPM to a range of surfaces including:
- Timber
- Brick
- Plywood
- Concrete
- Vinyl
- Metal
- Insulation Boards
- Tissue Faced Insulation
- Glass Reinforced Polyester
Our 22L canister of Roof Tack, used with our pro spray gun and hose, is designed to evenly coat large surface areas in a fraction of the time, compared to using glue pots or aerosol sprays. Using an adhesive canister system allows for up to a 600mm wide application spray, with the pressurised canister propelling the adhesive through the hose and out of the gun tip. This achieves zero waste to ensure that you get the most coverage out of your adhesive. Using our Roof Tack canister system, you will be able to achieve up to 350m2 coverage from one canister!
The spray adhesive is typically applied to the roofing membrane in a thin and even layer before installation of your other substrate. We advise spraying both substrates with our Roof Tack and bonding once the adhesive becomes touch dry (which will happen in seconds). Our Roof Tack is designed to create a fast tack so that you do not have to waste time waiting to bond your EDPM membrane to your substrate. This can help reduce both your overall labour and installation time, whilst working at a height no longer than necessary.